₨1,730.00
The HT-718 Cat7 RJ45 Crimping Tool With Cutter is designed for clean and reliable RJ45 cable termination. It helps users crimp Ethernet connectors, cut extra wires, and prepare network cables for routers, switches, CCTV systems, patch panels, and office networking.
This tool is useful for Cat5, Cat6, and Cat7 RJ45 connector work. It is especially helpful for technicians who install LAN cables, repair broken RJ45 ends, prepare custom patch cables, or manage CCTV IP camera wiring.
The cutter function helps trim cable ends neatly before or after connector placement. When used with the correct RJ45 plug and wiring order, it helps create a firm connection for stable network performance.
For best results, pair this crimping tool with good-quality RJ45 connectors, Cat6 or Cat7 LAN cable, and a network cable tester. A cable tester helps confirm that the cable has been crimped correctly before connecting it to routers, switches, PCs, DVR/NVR systems, or cameras.
If you want to explore alternative networking solutions, check out our collection for a clearer and more complete comparison.
Key Features
Product Specifications
| Feature | Details |
| Product Name | HT-718 Cat7 RJ45 Crimping Tool With Cutter |
| Tool Type | RJ45 network crimping tool |
| Connector Type | RJ45 |
| Cable Category Support | Cat5, Cat6, Cat7, if used with compatible connectors |
| Main Functions | Crimping and cutting |
| Additional Function | Stripping, if confirmed by stock |
| Best For | LAN cable, Ethernet cable, CCTV wiring, network setup |
| Use Case | Cable making, cable repair, router setup, office cabling |
| Suitable Users | IT technicians, CCTV installers, computer shops, home users |
| Local Market | Pakistan |
The HT-718 RJ45 crimping tool is used to attach RJ45 connectors to Ethernet cables. It helps press the connector pins into the cable wires so the plug can connect properly with routers, switches, computers, CCTV devices, and network panels.
It is useful when making new LAN cables, repairing damaged cable ends, or preparing custom cable lengths for offices, shops, homes, and CCTV systems.
The HT-718 is commonly used for Cat5, Cat6, and Cat7 RJ45 connector work. The final result depends on using the correct connector type with the correct cable category.
For example, Cat7 cable often needs a compatible shielded connector. If the connector is not suitable for the cable thickness or shielding, the crimp may not fit properly.
Yes, this tool is commonly listed for Cat7 RJ45 crimping work. It is useful when working with compatible Cat7 RJ45 connectors and proper cable preparation.
Cat7 cables can be thicker than standard Cat5e or Cat6 cables, so always confirm that your RJ45 connectors match your cable diameter and shielding type.
Yes, the HT-718 can be used for Cat5 and Cat6 RJ45 cable work when paired with compatible RJ45 connectors. This makes it useful for regular home internet, office networks, CCTV setups, and computer shop repair work.
For normal home and office wiring, Cat6 is commonly used because it offers strong performance for most network setups.
Yes, this product is listed with a cutter function. The cutter helps trim cable ends and remove extra wire length during RJ45 connector preparation.
A clean cut is important because uneven wire length can cause weak contact inside the connector.
Many HT-718 listings describe support for pass-through connector work. Pass-through RJ45 connectors allow wires to pass through the front of the plug before trimming, which can make wire order checking easier.
Before publishing this as a guaranteed feature, confirm that your exact stock supports pass-through RJ45 connectors.
Yes, the HT-718 is useful for CCTV installers who work with IP cameras, NVR systems, routers, switches, and Ethernet cable runs.
It helps prepare RJ45 ends for network cables used in camera connections. After crimping, always test the cable with a LAN cable tester before final installation.
Yes, beginners can use it, but they should follow the correct RJ45 wire order. The two common wiring standards are T568A and T568B.
For most setups, use the same wiring standard on both cable ends. A cable tester is recommended because it quickly shows if the cable was crimped correctly.
For complete cable work, use the HT-718 crimping tool with RJ45 connectors, Cat6 or Cat7 LAN cable, cable tester, wire stripper, router, switch, patch panel, and cable ties.
Using the right connector is very important. A Cat7 cable with the wrong RJ45 plug may be difficult to crimp or may not hold properly.
This tool is suitable for IT technicians, network installers, CCTV installers, computer shop owners, office maintenance teams, students, freelancers, and home users.
It is especially useful for people who make custom LAN cables, repair RJ45 connectors, install routers, connect switches, or set up CCTV IP cameras.
Common Uses
Before Buying, Confirm These Details
GS Systemz provides computer, networking, and tech accessories for customers in Pakistan. Buying from a local seller helps you confirm current stock, price, package contents, warranty, and delivery details before ordering.
For best results, confirm whether the product includes only the crimping tool or any extra accessories such as a screwdriver, stripper, or connectors.
What is the HT-718 Cat7 RJ45 crimping tool used for?
It is used for crimping RJ45 connectors onto Ethernet cables and cutting extra wires during cable preparation.
Can it be used for Cat7 cable?
Yes, it is commonly listed for Cat7 RJ45 connector work. Use compatible Cat7 connectors for the best fit.
Does it work with Cat5 and Cat6 cables?
Yes, it can be used for Cat5 and Cat6 RJ45 cable work when matched with the correct RJ45 connectors.
Does this tool include a cutter?
Yes, this product is listed as an RJ45 crimping tool with cutter support.
Does it support pass-through RJ45 connectors?
Many HT-718 listings mention pass-through connector use. Confirm this with your exact stock before publishing it as guaranteed.
Is this tool useful for CCTV installers?
Yes, it is useful for IP camera and NVR setups where RJ45 Ethernet cable connections are required.
Do beginners need a cable tester with this tool?
A cable tester is recommended because it confirms whether the RJ45 cable was crimped correctly.
What should I confirm before buying?
Confirm model number, brand, Cat7 support, pass-through support, included accessories, warranty, delivery charges, and return policy.
Reviews
There are no reviews yet.